Description
Included Components
- Front 2.0” strut spacer - 1/4” hot rolled steel
- Front 2.0” subframe drop spacers - 4140 heat treated chromoly
- Motor mount 2.0” lift spacer - 3/16" hot rolled steel
- Transmission 2.0" lift spacer - 3/16" hot rolled steel
- 2" CNC Machined Steering shaft extension
- Low pressure power steering hose extension
- Front brake line relocation brackets
- 2-short leaves to convert 3 leaf to 5 leaf pack
- Rear sway bar links - 11/16" x .120" wall DOM and 3/16" hot rolled steel
- Rear lower shock mounts - 1/8" hot rolled steel
- Rear bump stop drop brackets - 1/8" hot rolled steel
- Rear wind assist extension bracket - 1/8" hot rolled steel
- All necessary hardware
With this lift kit, 315/75R16 (35x12.50 equivalent) tires can be fitted with the following conditions met:
- Removal of the front mudflaps.
- Slight trimming to the rear of the front fender opening.
- Trimming of the front bumper and front inner fender well liner.
- Minimum 14mm wheel spacer (9/16”) if retaining factory 54mm offset steel wheels. This is for tire clearance between the inside of the tire and the strut and rear inner fender.
- Aftermarket wheels with an additional 14mm offset.
